What kind of lubricating oil is used for reducer
1. The horizontal cycloid reducer adopts oil pool lubrication under normal conditions, and the oil level can be kept in the middle of the oil sight window. When working conditions are bad and the ambient temperature is high, it can be lubricated by circulation.
2. Cycloid pinwheel reducer generally chooses 40# or 50# mechanical oil lubrication at room temperature. In order to improve the performance of the reducer and extend the service life of the cycloid pinwheel reducer, it is recommended to use 70# or 90# extreme pressure gears. Oil, lubricating oil should be reconsidered when working under high and low temperature conditions.
3. The vertical installation of the planetary cycloid reducer should strictly prevent the oil pump from cutting off the oil to avoid damage to the parts of the reducer.
4. When refueling, you can turn the breather cap on the upper part of the seat to refuel.When draining the oil, turn the drain plug at the bottom of the main seat to drain the dirty oil.There is no lubricating oil inside the reducer when it leaves the factory.
5. New oil should be replaced for 100 hours after the first refueling operation, (and clean the internal dirty oil), and then continue to work afterwards, and replace it every six months (8-hour work system). If the working conditions are bad, the oil change time can be appropriately shortened. Practice has proved that frequent cleaning and oil change of the reducer (such as 3-6 months) play an important role in prolonging the service life of the reducer.Lubricating oil should be replenished frequently during use.
6. The newly issued reducer has been lubricated and replaced every six months.The grease adopts aluminum disulfide-2# or 2L-2# lithium-based lubricating grease.
7、减速机润滑油常用的型号有铁霸BIG7超级齿轮润滑油，铁霸SYNMOLY合成齿轮油等。
