1. The foot-type horizontal cycloidal pinwheel reducer should be installed on a very solid horizontal foundation without vibration. In the use occasions that must be installed obliquely, the inclination of the axis line of the reducer shall not be greater than ±15.
2. When the flange type vertical planetary cycloid reducer is installed, the output shaft is vertically downward.
3. If it is necessary to use other special installation forms other than foot-plate horizontal installation and flange-type vertical installation, corresponding lubrication and sealing measures must be taken to ensure adequate lubrication of the reducer to prevent oil leakage.Please contact our technical department.
4. Grease-lubricated cycloid reducer has a free installation angle.
