减速机讲解蜗轮减速机出现问题的处理方法

发布时间:2021-01-10 14:27浏览 次数:

  下面详细介绍蜗轮减速机出现问题的处理方法:
  1.保证装配质量。可购买或自制一些专用工具,拆卸和安装减速机部件时,尽量避免用锤子等其他工具敲击;更换齿轮、蜗轮蜗杆时,尽量选用原厂配件和成对更换;装配输出轴时,要注意公差配合。
  2.Selection of lubricants and additives.Worm gear reducers generally use 220# gear oil. For reducers with heavy loads, frequent starts, and poor use environments, some lubricating oil additives can be used to make the gear oil still adhere to the gear surface when the reducer stops running, forming protection Membrane to prevent heavy load, low speed, high torque and direct contact between metals during startup.The additives contain seal ring regulator and anti-leakage agent to keep the seal ring soft and elastic and effectively reduce lubricating oil leakage.
  3.Selection of the installation location of the reducer.Where the location permits, try not to use vertical installation.In vertical installation, the amount of lubricating oil added is much more than that in horizontal installation, which may easily cause heat generation and oil leakage of the reducer.
  4.建立润滑维护制度。可根据润滑工作“五定”原则对减速机进行维护,做到每一台减速机都有责任人定期检查,发现温升明显,超过40℃或油温超过80℃,加油时,要注意油量,保证减速机得到正确的润滑。
 

Copyright © 2014-2020 Ever-Power Reducer Co., Ltd. All rights reserved. Main business: reducer, screw lift, reducer, etc.