Helical Gear Speed Reducers
Provide high-efficiency speed reduction through 1, 2, 3, or 4 units of gears. Power can be transmitted from a high-swiftness pinion to a slower-speed gear. Helical gears usually operate with their shafts parallel to one another. The two most common types will be the concentric (input and result shafts are in line) and parallel shaft (insight and output shafts are offset). Single-stage helical gear reducers are typically used for equipment ratios up to about 8:1. Where lower speeds and higher ratios are needed, double, triple, and quadruple equipment reduction stages may be used.

Worm Gear Speed Reducers
A single reduction velocity reducer can achieve up to a 100:1 decrease ratio in a small package. Referred to as right position drives, these contain a cylindrical worm with screw threads and a worm. With an individual begin worm, the worm gear advances only one tooth for every 360-degree convert of the worm. So, whatever the worm’s size, the gear ratio may be the ‘size of the worm gear to 1′. Higher decrease ratios can be created through the use of double and triple decrease ratios.

Basic Types of Gearboxes

The purpose of a gearbox is to increase or reduce speed. Because of this, torque output will be the inverse of the function. If the enclosed drive can be a velocity reducer, the torque result will increase; if the drive boosts speed, the torque output will decrease. Gear drive selection factors include: shaft orientation, acceleration ratio, design type, nature of load, gear ranking, environment, mounting position, operating temperature range, and lubrication.

We supply right angle worm gearbox; call us to learn much more.