Link

Worm get gearbox with motor
worm motor
A robust worm-get gearbox powered by an MM28 motor. Ideal applications where a simple to fit, high torque outcome is required. Great for student based jobs including robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The motor is snap installed into its cradle to engage the gear and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for little walking robots, lifting mechanisms, and other applications where great torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draw up to a few amps, making them perfect applicants for the DRV8833 motor driver carrier. Electric motor overheating can be due to excessive stalling, also at suprisingly low voltages. We advise that you utilize stall-detection sensors, or simply watch your robot, to ensure that it doesn’t stall for lots of seconds at the same time.
This gearbox includes a 4 mm diameter, round output shaft, which works together with the wheels that are appropriate for Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, although it is not especially designed to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily found in the tightest applications. Economical right position worm geared motors established new specifications for reliability, effectiveness and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration now and a future proof alternative. The Ever-Power gear motor offers total versatility in mounting choices includes shaft, base, encounter, and flange solutions. The electric motor terminal box can be mounted in alternative positions rotated in 90º steps around the motor frame providing for unparalleled integration options.
Ever-Power gear motors adhere to UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a true total remedy for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be used outdoors or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the output shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the solution for applications requiring a good corner turn, optional dual output, or perhaps an inability for the motor to be back driven. The DC right angle gear motors are designed for continuous and intermittent duty operation. Our right angle gear reducers are designed with several mounting plate choices, making them perfect for a variety of DC engine based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a small package size. Worm Gear Motors are great for applications that require a self- locking or breaking feature since the result shaft can’t rotate when there’s no power applied. Also, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision trim gears, voltages and sizes, EP Items has a DC Worm Equipment Motor solution for the application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Devices / Security Gates / Dental Seats / Ambulance Cots & Stretchers Quite a few DC Motors could be complimented with among our Worm Gearheads. EP Products will work with you to design and manufacture a Worm Gear Engine that will optimize the performance of your specific application.
Built to your unique requirements
Motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
Overall Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine uses a metal gear box for strength and a high torque output. Because of the special mechanical framework of the worm drive the motor output shaft can be self locking and can not be rotated.
This part uses a two wire connection and supports direction control along with PWM speed control. Ranked voltage is 12v and will accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially show their power in applications where superior gear ratios are necessary. Our worm geared motors are consequently optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a high overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each of these has its unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to fulfill your needs.
Worm gear models impress with their superior power density and small style. If required, we are able to also source them with the highly effective nsd tupH surface area treatment.
As well as the basic EP casing, you can expect an extensive type of bolt-on elements to customize the product including torque arms, shaft covers and output flanges. These could be easily field installed, but we will also be pleased to assemble the average person components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear models feature a easy, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product ideally suited for severe and challenging industries like meals processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or immediate motor mounts in additional foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units have on all sides unique fixing possibilities and enable a simple assembling for the customer.
Additional drive configurationscan be designed by use of built-about components (e.g. torque arm and result flanges). The housings are created in light weight structure out of aluminium die cast. Motor attachment is realised generally by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Travel Gearbox with Electric motor – incorporating the following features: 1 to 6V voltage rating, 17100 rpm no load swiftness, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm wide, 40mm high, a robust worm get gearbox powered by an MM28 electric motor (included), most suitable for applications where an easy to fit, high torque productivity is necessary, nylon housing and equipment, requires light oil or perhaps silicon grease lubrication, well suited for student based tasks including robots and buggies.
Most ideal for applications where a simple to fit, high torque outcome is required
Perfect for student based tasks including robots and buggies
Reversible Great torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Excessive torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared electric motor with self-lock, that is, regarding motor without electrical, the productivity axis is fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole electric motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windows, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely a much better option when compared to spur gear motor. Why is worm gear so particular? Take a look wiki out: Worm Get.
“Unlike with ordinary gear trains, the path of transmission (input shaft vs output shaft) is not reversible when using large reduction ratios, due to the better friction involved between your worm and worm-wheel, when usually an individual start (1 spiral) worm is used. This can be an advantage when it is desired to get rid of any possibility of the result driving the input.”
In other words, it is hard to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

For those whose passion is worm motor, we have the responses.