Link

Our worm gear reducers offer a choice of a good or hollow result shaft and feature an adjustable mounting placement. Both SW-1 and the SW-5, nevertheless, can withstand shock loading much better than other reduction gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Rate Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Style for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s quickness reducer product line – has been serving industry reliably for over 40 years. Its tested modular design has set the industry standard for performance and is the most imitated item in the current worm gear velocity reducer market. But why settle for a knock-off when you’re able to have the initial – from EP Gear.
Specifications
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow output bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in stock)
Product Features
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for longer operating life.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for optimum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel result shaft assures capacity for high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal existence.
Both 2D and 3D CAD drawings can be found in our eCatalog.
GEARBOX REDUCERS
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are a perfect match for motors with high insight speeds, or when gearmotor efficiency is important. Get in touch with our technical sales personnel for help determining which gearbox solution is most beneficial for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and invite for a corner turn with optional dual output. The reducers can be found in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes are designed with five mounting options providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the features of our correct angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our right angle planetary gearboxes offer a robust solution. The right angle bevel gearbox comes in 18 ratios ranging from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest operation of our rate reducers. These gearboxes are made to deal with varying loads with small backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios ranging from 5:1 to 308:1, we have a solution to fit your needs. Our 52 frame size can be available with plastic-type material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations provide the highest efficiency and best output torque of all our speed reducers. These gearboxes are created to deal with varying loads with little backlash. Planetary gear reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we have a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes are the best choice for continuous duty applications. Their equipment cluster design provides a highly effective method for dissipating temperature. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options so they work well in environments with limited space. Our parallel shaft gear reducers provide an affordable drop-in replacement solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right angle gearboxes, acceleration reducers, worm equipment reducers and worm drive gearboxes. Gear reduction boxes include a gear arrangement in which a equipment in the form of a screw, also called a worm, meshes with a worm gear. These gears are typically created from bronze and the worms are steel or stainless steel.

While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other equipment reduction boxes. A major benefit of worm equipment reducers is certainly that they produce an output that is 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox provides right hand threads; to change the path of the output, a left-hands thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio

Go here to discover why you require worm reduction gearbox.