servo gear reducer

3 Backlash Levels, only 3 arc-min
IP65 environment protection
Motor adaptors for just about any servo engine, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next generation cycloidal swiftness reducer. It utilizes 52100 grade bearing steel on all of its speed decrease components. It is offered with a complete two year warranty, not limited by hours of procedure, and can endure abuse that could break one’s teeth of ordinary quickness reducers.
The EP 3000, easily available with inputs for both servo and induction motors, features a compact style with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Offered in two backlash ratings and multiple mounting options, the EP 3000 has a design hard enough for both servo and regular induction motor applications. The unique two piece pin housing design guarantees result shaft backlash rankings of less than 6 arc-min.
The EP provides a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows a credit card applicatoin to reach negligible backlash, maintain excellent rigidity, and maximize control stability so that the required output motion could be easily achieved. The design is truly a distinctive concept, utilizing a full get in touch with screw-like tranny for high performance and elimination of put on. The unit provides optimum compactness using orthogonal axes and contains a sizable hollow shaft for versatility.

Wide variety of servo gearboxes, made to fit almost all servo motors on the market
Designed for the best torsional stiffness and the lowest angular backlash, designed for the utmost torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The correct technical solution because of a comprehensive selection of sizes, gear stages, transmission ratios, designs and non-standard designs.
Servo equipment reducers (worm, coaxial, helical and bevel helical devices) Catalog SR
Operating instructions:
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the growth of our selection of Servo Reducers, at this point offering five levels of precision to meet up any application requirements. The five degrees of precision available allows a machine designer to select the mandatory reducer precision to meet their requirements and their budget. They are available in both in-range and right-angle variations, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Typical applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Handling, Automation, Aerospace, Machine Tool and Robotics.
The installation faces of the HT, HP, Electronic and B versions are identical, making it possible to interchange a unit with a higher or lower accuracy unit if needed.
A wide range of motor couplings and mounting flanges are for sale to the entire reducer range to attach virtually any servo motor and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive elements.
These reducers are typically selected predicated on the peak cycle forces, which often happen during accelerations and decelerations. These cycle forces rely on the powered load, the quickness vs. time profile for the cycle, and any other external forces acting on the axis. For more selection details, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. The application info will be reviewed by our engineers, who will recommend the very best solution for your application.
EP Inc. offers a full selection of modular servo gearboxes /worm reducers. The modular design allows for configurations with motor input flange and result pinion for rack and pinion drives, in addition to solid output shafts, Hollow bore result, and insight shafts for all other positioning applications. The modular style allows for universal mounting of the gearbox in virtually any orientation.
They can be used on motors with a NEMA23 standard flange via an adaptor kit. As the gears are naturally angled, they result in a short total amount of the motor and its gear.
The series may also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole can also be constructed on the gear’s output side.
Built with a straightforward and robust style, the series provides gearing ratios that range from 6:1 to 75:1. The user may also customize the components through the order, in order to match the gear to its intended application.
The Precision Planetary Gears of the EPRG series contains a thorough selection of low backlash planetary gearboxes, with up to class 3′ precision, available in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to at least one 1:1,000). These models likewise incorporate versions with double shaft, right position shaft and right angle output, as well as a full range of adapters for engine mounting, making them capable of meeting the requirements of even the most varied applications. They are made for use with integrated servo and stepper EP motors, mounted straight or via adaptor flanges, but can also be used with other EP motor types. This selection of products is based on years of encounter and represents the outcome of a decade-long study aimed at improving performance.
Optimum precision and dynamics, combined with outstanding torque density, will be the key requirements specific for reliable servo gearboxes in practice. EP offers servo gearboxes for any application and any efficiency range. Our low-backlash planetary and right-position gearboxes reflect our passion for advancement and the highest levels of precision.
Worm equipment reducers provide market advance solution with effectiveness and flexibility. Low amount of basic models can be applied to an array of power ratings guaranteeing top performance and decrease ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are created for high-performance mechanical equipment. When the motor swiftness must be reduced, the output torque improves and send torque completely to the application. We believe that clients will appreciate our equipment reducer to attain their demand. Just visit EP, you will get more information about servo gearheads, servo gearboxes, and equipment reducers. We always keep in the years ahead for your support.
Plug the Quickness Reducer into the desired channel of your receiver, and plug the lead from your own servo (or servo wye) in to the man servo lead from the circuit plank. The arranged screw on the blue trim pot, located near the top of the main circuit board, is used to control the acceleration of the servo. Change the set screw completely clockwise (CW) for regular servo speed without speed reduction, completely counter-clockwise (CCW) for maximum speed reduction, or any place in between for partial velocity reduction. The crimson LED indicates three feasible conditions: Slower Blinking = No Transmission; Solid On = No Swiftness Decrease; Fast Blinking = Reduced Quickness Setting
Please note that if you make any alter to the speed establishing while the receiver is on, you must cycle capacity to the receiver (turn if off and back on) for the brand new speed environment to take impact. This circuit can also be used in conjunction with this Servo Reverser to trigger flap or retract servos to carefully turn in reverse directions for appropriate function. Guidelines are included for easy installation and use.
IMPORTANT NOTE: This product will only work on a regular, proportional servo. It will NOT work on a retract-type servo, because they do not acknowledge any servo positions other than clockwise (CW) and counter-clockwise (CCW). Retract servos cannot be slowed down, actually by a transmitter which includes this function, as their style and electronics do not allow it. Examine the FAQ page to learn more.
This device will reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you wish to control for a more scale-like motion of flaps or retracts. Adjustable, it could be set to reduce the quickness of your servo from super-slow motion to no speed decrease at all, with an nearly infinite amount of positions in between. Maximum reduction period for a servo to visit 90 degrees is approximately 14 seconds, minimum period (no reduction) is simply the normal quickness of the servo. Great for reducing or removing the inclination of a plane to “balloon up” when flaps are deployed. It can be used to control several servo by usage of a regular servo Y.
This is actually the new regulated version that can be utilized on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that are powered by 2-cell 6.6-8.4 volt Li-Po/Li-Ion/LiFE batteries. This unit won’t reduce the voltage likely to your servos.
The EP Gear Reducer is the perfect solution for servomotor applications such as for example packaging machines, gantries, injection molding machines, pick and place, and linear slides.Provided in concentric shaft, correct position solid shaft, and correct angle hollow shaft designs with modular adaptor flanges and keyless compressible bushings to quickly mount to any manufacturer’s servo electric motor. The EP Series helical gears have slanted teeth compared to spur gears with directly cut teeth, producing a smoother equipment mesh, yielding significantly lower noise levels.
The low backlash EP planetary servo gear units are created for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. These were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance parts.
They offer a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units are available in the following versions:
PSC = B5 output, clean output shaft
PSKC = B5 output, with keyway
PSCZ = B14, output, smooth output shaft
PSKCZ = B14 result, with keyway

That’s all on servo gear reducer, curious about more?