small worm gearbox

Small Precison Worm Decrease Gearboxes
There are a variety of specifications you will need to consider when making a worm gearbox selection.
First, what is the insight and output torque requirements? Next, check vendor horsepower/torque charts and select the correct worm equipment reducer.
If how big is the gearbox will probably be an important consideration after that check the reducer dimension specs, not all manufacturers make compact units. Actually, working with the proper supplier will help you not just find the right equipment reducer but also prevent some of the most typical mistakes in reducer selection. We provide a free guide to assist you find the right supplier to work with.
For low and fractional horsepower program we offer two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between both of these models. Both feature either a hollow or solid output shaft. Both versions are compact and provide users a wide variety of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your unique application or task is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is so versatile it can work just about anywhere.
Features & Options
Double Shaft or One Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built unique, high precision mini gearboxes that can’t be found somewhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that were created and created to meet your unique specifications.
E mail us for the mini gearbox the application requires, or demand a quote upon a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, velocity reducers, equipment drives, and gearmotors. All terms can be used more or less interchangeably. Please be aware that the links for our little gear drives include information on the full selection of body sizes for that series or style.
Bevel Box Micro Gear Drive
Our bevel container miniature gear drives are app rated for the the best balance of performance and cost. Torque can be balanced to meet up your RPM and working life requirements. Light-weight with low backlash efficiency (less than 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a compact package. They provide an result shaft at 90° from the input, and are available in gear ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminium housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also called “shaft to bore gearboxes,” the unit provide a single insight shaft that protrudes from reverse sides of the housing; output is a keyed bore. Standard solitary- and double-end shafts can be found and supplied with keys and retainer rings. An array of gear ratios and input sizes are available to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long term lubrication. They offer two insight shafts on opposite sides of the frame, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high performance functionality with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes produce an output at 90° from the input. They deliver superior overall performance in a wide variety applications and are built with small footprints, making them well suited for functions where space is limited. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and are rated for boosts to 3,000 RPM. Aluminum housings and stainless gears and shafts make these inline spur gearboxes tough and corrosion resistant, for your most demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm gear reducers deliver excellent performance with high efficiency, and show rugged building for challenging power transfer functions. Available in three gear ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely small footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a customized miniature gearbox to meet your unique specifications. We can produce customized micro gearboxes in any configuration the application requires, with output torque levels as high as 900Nm. We can work from your gearbox designs, reverse engineer an existing unit, or help you develop an all-new design that provides the performance you need. Request a quote on a customized miniature gearbox or contact us to discuss your unique requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and special ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive important and retainer rings can be supplied to your specs for any of our hollow bore miniature gearboxes. We offer a fundamental selection of one ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our program engineers to discuss your unique needs.
We provide a broad selection of misalignment shaft couplings in in . and metric bore sizes. In . and metric precision floor shafts are available from stock.
Contact Us for High Performance Miniature Gearboxes
We will be the miniature gearbox specialists. Our micro gear drive versions deliver superior functionality in a little footprint, and are tough enough for challenging work environments. Contact us to learn more about our mini gearboxes, or demand a quote on a custom made model that is tailored to your preferences.
Additional benefits of worm drive gearboxes include: