Product Description
Reliability
DT14 adopts a fully helical gear and planetary gearbox structure, with low noise and strong load-bearing capacity;
The pressure resistance and overheating resistance of the friction material of the synchronizer are leading domestically, and the lifespan of the synchronizer has been extended to match that of the gearbox assembly;
The DT14 assembly has undergone 2 million kilometers of road validation, and the B10 has a lifespan of 1.6 million kilometers. The entire series can be equipped with hydraulic retarders to ensure driving safety.
Convenience
Single H control of the top cover and front and rear auxiliary box pneumatic shift mode, achieving step-by-step gear shifting and jumping operation, with clear gear positions and convenient operation;
Self enhancing double cone synchronizer reduces shifting force by 2-3 times compared to synchronizers of the same level, making shifting more lightweight and giving a sedan like feel;
The ultra long oil change cycle of 300000 kilometers is at the leading level in the industry, making it easier for users to use.
High efficiency
Adopting a dual lubrication method of active lubrication and splash lubrication to lubricate key components such as bearings, synchronizers, and gears, providing more complete lubrication and lower friction losses;
By using an independent external oil cooling system, the problem of high temperature of the gearbox assembly in special road conditions (climbing long slopes) is avoided, ensuring stable operation of components, higher transmission efficiency, and prolonging oil change HangZhouage and gearbox service life.
| Transmission product characteristic parameters | |
| Torque (N · m) | 2000-3200 |
| Transmission efficiency | 97.4% |
| Noise (dB) | 86 |
| Net weight (kg) | 302 |
| Oil change HangZhouage (km) | 300 thousand |
| Speed ratio | DD/OD(DD:1-16.41,3.22-15.06 OD:0.8-13.16,2.58-12.09) |
| B10 Durability (km) | 1 million 200 thousand |
Here’s why our products stand out:
1. Extensive Product Range: We offer a diverse selection of buses, school buses, andspecial purpose vehicles to cater to various transportation needs. Whether yourequire standard buses for public transport, specialized school buses withenhanced safety features, or custom-built special purpose vehicles for specificapplications, we have a solution to meet your requirements.
2. Superior Quality and Reliability: Our vehicles are manufactured to the highestindustry standards, ensuring exceptional quality, reliability, and longevity. Wecollaborate with reputable manufacturers and conduct rigorous quality controlchecks to deliver products that exceed customer expectations. Our commitmentto CHINAMFG is reflected in every vehicle we offer.
3. Cutting-Edge Technology: We incorporate advanced technologies andinnovations into our vehicles to enhance performance, efficiency, and safety.From fuel-efficient engines and intelligent control systems to state-of-the-art
safety features and eco-friendly designs, our products are at the forefront ofautomotive technology.
4. Customization Options: We understand that every client has unique needs ancpreferences, Therefore, we provide customization options to tailor our vehiclesaccording to specific requirements. Whether it’s seating capacity, interiorconfigurations, accessibility features, or branding elements, we work closely withour clients to deliver personalized solutions.
5. Focus on Safety: Safety is our top priority. Our school buses are designed withcomprehensive safety features, including reinforced structures, advanced brakincsystems, and integrated safety technologies. We prioritize passenger and driversafety to provide peace of mind for both educational institutions and parents.
6. Exceptional After-Sales Service: Our commitment to customer satisfactionextends beyond the purchase. We provide reliable after-sales service andsupport, including spare parts availability, technical assistance, and maintenanceguidance. Our dedicated team ensures that our customers receive prompt andefficient service throughout the ownership lifecycle.
FAQ
1.What do you need to provide a quote?
Please kindly send us the drawing of your product. Details below should be included,
A.Materials B. Surface Finish C. Tolerance D. Quantity
(Please be noted that these are essential for our quoting. We couldn’t quote the specific
price without any of them.).
2.When can I get the price?
Our professional sales team will feedback your RFQ within 12hours, and give you the Quotation within 48hours max. if the drawing and specification is all in details.
3.How can I get the sample to check your quality?
After price confirmation, you can require for samples to check our product’s quality. If you just need a blank sample to check the manufacturing quality, we will provide you sample after the sample order confirmed.
4.What’s the lead time for Mould and samples ?
For normal project, we can complete Mould and supply the 1st article sample within 30 to 40days.
For urgently project, we can complete the Mould and Sample within 20days max.
5.What’s the payment terms for Order ?
For Mould/tooling and sample : 50% deposit pay by Order, rest 50% pay after sample approval.
For production Order for new Customers : we request 30% down payment, rest 70% pay by copy of Original B/L copy. For long lasting regular customer, we can give better payment terms, such as 100% pay after delivery or by B/L copy.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Certification: | TUV, GS |
| Torque (N · M): | 2000-3200 |
| Transmission Efficiency: | 97.4% |
| Noise (dB): | 86 |
| Customization: |
Available
| Customized Request |
|---|
Common Problems and Troubleshooting for Worm Gearboxes
Worm gearboxes, like any mechanical component, can experience various issues over time. Here are some common problems that may arise and possible troubleshooting steps:
- Overheating: Overheating can occur due to factors such as inadequate lubrication, excessive loads, or high operating temperatures. Check lubrication levels, ensure proper ventilation, and reduce loads if necessary.
- Noise and Vibration: Excessive noise and vibration may result from misalignment, worn gears, or improper meshing. Check for misalignment, inspect gear teeth for wear, and ensure proper gear meshing.
- Leakage: Oil leakage can be caused by damaged seals or gaskets. Inspect seals and gaskets, and replace them if necessary.
- Reduced Efficiency: Efficiency loss can occur due to friction, wear, or misalignment. Regularly monitor gearbox performance, ensure proper lubrication, and address any wear or misalignment issues.
- Backlash: Excessive backlash can affect precision and accuracy. Adjust gear meshing and reduce backlash to improve performance.
- Seizure or Binding: Seizure or binding can result from inadequate lubrication, debris, or misalignment. Clean the gearbox, ensure proper lubrication, and address misalignment issues.
- Worn Gears: Worn gear teeth can lead to poor performance. Regularly inspect gears for signs of wear, and replace worn gears as needed.
- Seal Wear: Seals can wear over time, leading to leakage and contamination. Inspect seals regularly and replace them if necessary.
If you encounter any of these problems, it’s important to address them promptly to prevent further damage and maintain the performance of your worm gearbox. Regular maintenance, proper lubrication, and addressing issues early can help extend the lifespan and reliability of the gearbox.
Worm Gearboxes in Conveyor Systems: Benefits and Considerations
Worm gearboxes play a crucial role in conveyor systems, offering several benefits and considerations for their effective integration:
- Space Efficiency: Worm gearboxes have a compact design, making them suitable for applications with limited space, such as conveyor systems.
- High Reduction Ratios: Worm gearboxes can achieve high reduction ratios in a single stage, allowing for slower conveyor speeds without sacrificing torque.
- Self-Locking: Worm gearboxes have inherent self-locking properties, preventing the conveyor from moving when the motor is not actively driving it.
- Directional Control: Worm gearboxes facilitate directional control, enabling the conveyor to move forward or reverse as needed.
- Low Noise: Worm gearboxes often produce lower noise levels compared to other gearbox types, contributing to quieter conveyor operation.
However, there are also considerations to keep in mind when using worm gearboxes in conveyor systems:
- Efficiency: Worm gearboxes may have lower mechanical efficiency compared to some other gearbox types, leading to energy losses.
- Heat Generation: Worm gearboxes can generate more heat due to sliding contact between the worm and gear, necessitating proper cooling mechanisms.
- Lubrication: Proper lubrication is critical to prevent wear and ensure efficient operation. Regular maintenance is required to monitor lubrication levels.
- Load and Speed: Worm gearboxes are well-suited for applications with high torque and low to moderate speed requirements. They may not be optimal for high-speed conveyors.
Before integrating a worm gearbox into a conveyor system, it’s important to carefully consider the specific requirements of the application, including load, speed, space constraints, and efficiency needs. Consulting with gearbox experts and manufacturers can help ensure the right choice for the conveyor’s performance and longevity.
How to Select the Right Worm Gearbox for Your Application
Selecting the right worm gearbox for your application involves careful consideration of various factors:
- Load Requirements: Determine the torque and load requirements of your application to ensure the selected gearbox can handle the load without compromising performance.
- Speed Reduction: Calculate the required gear reduction ratio to achieve the desired output speed. Worm gearboxes are known for high reduction ratios.
- Efficiency: Consider the gearbox’s efficiency, as worm gearboxes typically have lower efficiency due to the sliding action. Evaluate whether the efficiency meets your application’s needs.
- Space Constraints: Assess the available space for the gearbox. Worm gearboxes have a compact design, making them suitable for applications with limited space.
- Mounting Options: Determine the mounting orientation and configuration that best suits your application.
- Operating Environment: Consider factors such as temperature, humidity, and exposure to contaminants. Choose a gearbox with appropriate seals and materials to withstand the environment.
- Backlash: Evaluate the acceptable level of backlash in your application. Worm gearboxes may exhibit more backlash compared to other gear types.
- Self-Locking: If self-locking capability is required, confirm that the selected gearbox can prevent reverse motion without the need for external braking mechanisms.
- Maintenance: Consider the maintenance requirements of the gearbox. Some worm gearboxes require periodic lubrication and maintenance to ensure proper functioning.
- Cost: Balance the features and performance of the gearbox with the overall cost to ensure it aligns with your budget.
Consult with gearbox manufacturers or experts to get recommendations tailored to your specific application. Testing and simulations can also help validate the suitability of a particular gearbox for your needs.
editor by CX 2024-04-23