Product Description
The design of UDL series planet cone-disk stepless speed variator compromises the advanced technology both at home and abroad.
Power | Model | speed ratio | n2(r/min) | M2(NM) |
0.18kw | UDL0.18 | 1.6-8.2 | 880-170 | 1.5~3 |
0.37kw | UDL0.37 | 1.4-7 | 1000-200 | 3~6 |
0.55kw | UDL0.55 | 1.4-7 | 1000-200 | 4~8 |
0.75kw | UDL0.75 | 1.4-7 | 1000-200 | 6~12 |
1.1kw | UD1.1 | 1.4-7 | 1000-200 | 9~18 |
1.5kw | UD1.5 | 1.4-7 | 1000-200 | 12~24 |
2.2kw | UD2.2 | 1.4-7 | 1000-200 | 18~36 |
3kw | UD3 | 1.4-7 | 1000-200 | 24~48 |
4kw | UD4 | 1.4-7 | 1000-200 | 32-64 |
UDL series planet cone-disk stepless speed variators are
widely used for all kinds of automatic production
lines,pipelines and assembly lines which need speed-regulation.It’s a good companion for your proction.
Note recommendations
To install the reduction unit it is necessary tonote the following recommendations:
1. Check the correct direction of rotation of thereduction unit output shaft before fitting the unit tothe machine.
2. Before mount with the prime moveanddevice,please check the reducers every axiadiameter, aperture,key and key slot,
to be theirdimensions are not deviation, and avoidassembaurtoo tight or too loose, unless it wilinfluence the reducer’s performance.
3. The mounting on the machine must be stableto avoid anv vibration.
4.Whenever possible,protect the reductiorunit against solar radiation and bad weather.
5.In the case of particularly lengthy periods ofstorage (4-6 months), if the oil seal is not immersedin the lubricant inside the unit.
It is recommended tochange it since the rubber could stick to the shaft ormay even have lost the elasticity it needs to functionproperly.
6.Painting must definitely not go over rubberparts and the holes on the breather plugs, if any.
7.When connect with hollow or CHINAMFG shaftplease grease the joint to avoid lock or oxidation.
8.Check the correct level of the lubricantthrough the indicator, if there is one.
9. Starting must take place gradually, withoutimmediately applying the maximum load
10. Supporting unit is required when usingvarious of reducer matched with motor directiy andthe wsight of motor is a little bigger than common.
11 .Ensure the motor cools correctly byassuring good passage of air from the fan side.
12. In the case of ambient temperatures+40°C call the Technical Service.
Application: | Motor, Electric Cars, Agricultural Machinery |
---|---|
Function: | Speed Changing, Speed Reduction, Speed Increase |
Layout: | Cycloidal |
Samples: |
US$ 71/Piece
1 Piece(Min.Order) | Order Sample |
---|
Customization: |
Available
| Customized Request |
---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: |
|
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Is it Possible to Reverse the Direction of a Worm Gearbox?
Yes, it is possible to reverse the direction of a worm gearbox by changing the orientation of either the input or output shaft. However, reversing the direction of a worm gearbox can have some implications that need to be considered:
- Efficiency: Reversing the direction of a worm gearbox can potentially affect its efficiency. Worm gearboxes are typically more efficient in one direction of rotation due to the design of the worm and worm wheel.
- Backlash: Reversing the direction of rotation might lead to increased backlash or play in the gearbox, which can impact precision and smooth operation.
- Lubrication: Depending on the gearbox’s design, reversing the direction could affect lubrication distribution and lead to uneven wear on the gear teeth.
- Load: Reversing the direction might also impact the gearbox’s load-carrying capacity, especially if it’s designed for predominantly one-way operation.
- Noise and Vibration: Direction reversal can sometimes result in increased noise and vibration due to changes in gear engagement and meshing behavior.
If you need to reverse the direction of a worm gearbox, it’s advisable to consult the gearbox manufacturer’s guidelines and recommendations. They can provide insights into whether the specific gearbox model is suitable for reversible operation and any precautions or adjustments needed to ensure proper functioning.
Materials Used for Worm Gears
Worm gears are manufactured using a variety of materials to meet different application requirements. Some commonly used materials for worm gears include:
- Steel: Steel is a popular choice for worm gears due to its strength, durability, and wear resistance. It can handle heavy loads and is often used in industrial applications.
- Bronze: Bronze offers good lubricity and is commonly used for the worm gear (worm) component. It provides effective wear resistance and works well in applications where quiet operation is essential.
- Cast Iron: Cast iron is known for its high strength and durability. It’s often used for worm gears in applications where shock loads or heavy-duty conditions are expected.
- Aluminum: Aluminum worm gears are lightweight and corrosion-resistant, making them suitable for applications where weight reduction is important.
- Plastic: Some worm gears are made from plastic materials such as nylon or acetal. These materials are often chosen for their self-lubricating properties and quiet operation.
- Composite Materials: Composite materials can offer a combination of properties, such as lightweight construction and corrosion resistance. They can be suitable for specific applications.
The choice of material depends on factors such as the application’s load, speed, operating environment, and required performance characteristics. It’s important to consider these factors when selecting the appropriate material for worm gears to ensure optimal performance and longevity.
Advantages of Using a Worm Reducer in Mechanical Systems
Worm reducers offer several advantages that make them suitable for various mechanical systems:
- High Gear Reduction Ratio: Worm gearboxes provide significant speed reduction, making them ideal for applications that require a high gear reduction ratio without the need for multiple gears.
- Compact Design: Worm reducers have a compact and space-saving design, allowing them to be used in applications with limited space.
- Self-Locking: Worm gearboxes exhibit self-locking properties, which means that the worm screw can prevent the worm wheel from reversing its motion. This is beneficial for applications where the gearbox needs to hold a load in place without external braking mechanisms.
- Smooth and Quiet Operation: Worm gearboxes operate with a sliding motion between the teeth, resulting in smoother and quieter operation compared to some other types of gearboxes.
- High Torque Transmission: Worm gearboxes can transmit high torque levels, making them suitable for applications that require powerful torque output.
- Heat Dissipation: The sliding action between the worm screw and the worm wheel contributes to heat dissipation, which can be advantageous in applications that generate heat during operation.
- Stable Performance: Worm reducers offer stable and reliable performance, making them suitable for continuous operation in various industrial and mechanical systems.
Despite these advantages, it’s important to note that worm gearboxes also have limitations, such as lower efficiency compared to other gear types due to the sliding motion and potential for higher heat generation. Therefore, selecting the appropriate type of gearbox depends on the specific requirements and constraints of the application.
editor by CX 2023-10-10
China Professional Mechanical Power Transmission Motovario Like RV Series Worm Gearbox components of gearbox
Product Description
Characteristics:
(1)Large output torque
(2) Safe, reliable, economical and durable
(3) Stable transmission, quiet operation
(4)High heat-radiating efficiency, high carrying ability
(5) Combination of 2 single-step worm gear speed reducers, meeting the requirements of super speed ratio
Technical data:
(1) Iput power:0.06kw-15kw
(2) Output torque:4-2320N.M
(3) Speed ratio: 5/10/15/20/25/30/40/50/60/80/100
(4) With IEC input flange: 56B14/71B14/80B5/90B5…
Materials:
(1) NMRV571-NMRV090: Aluminium alloy housing
(2) NMRV110-150: Cast iron housing
(3) Bearing: CHINAMFG bearing & Homemade bearing
(4) Lubricant: Synthetic & Mineral
Color:
(1) Blue / Light blue
(2) Silvery White
Quality control
(1) Quality guarantee: 1 year
(2) Certificate of quality: ISO9001:2000
(3) Every product must be tested before sending
Motor power | Model | speed ratio | output speed | output toruqe |
1.1kw 1400rpm | NMRV130 | 80 | 18rpm | 408.0N.M |
NMRV130 | 100 | 14rpm | 480.0N.M | |
1.5kw 1400rpm | NMRV130 | 80 | 18rpm | 557.0N.M |
NMRV130 | 100 | 14rpm | 655.0N.M | |
2.2kw 1400rpm | NMRV130 | 25 | 56rpm | 319.0N.M |
NMRV130 | 30 | 47rpm | 365.0N.M | |
NMRV130 | 40 | 35rpm | 468.0N.M | |
NMRV130 | 50 | 28rpm | 563.0N.M | |
NMRV130 | 60 | 24rpm | 657.0N.M | |
NMRV130 | 80 | 18rpm | 816.0N.M | |
NMRV130 | 100 | 14rpm | 976.0N.M | |
3.0kw 1400rpm | NMRV130 | 25 | 56rpm | 430.0N.M |
NMRV130 | 30 | 47rpm | 491.0N.M | |
NMRV130 | 40 | 35rpm | 638.0N.M | |
NMRV130 | 50 | 28rpm | 767.0N.M | |
NMRV130 | 60 | 24rpm | 896.0N.M | |
NMRV130 | 80 | 18rpm | 1113.0N.M | |
4.0kw 1400rpm | NMRV130 | 25 | 56rpm | 573.0N.M |
NMRV130 | 30 | 47rpm | 655.0N.M | |
NMRV130 | 40 | 35rpm | 851.0N.M | |
NMRV130 | 50 | 28rpm | 1571.0N.M | |
NMRV130 | 60 | 24rpm | 1195.0N.M |
Application: | Industry |
---|---|
Function: | Speed Reduction |
Layout: | Cycloidal |
Hardness: | Hardened Tooth Surface |
Installation: | Vertical Type |
Step: | Single-Step |
Customization: |
Available
| Customized Request |
---|
Maintenance Tips for Prolonging the Life of a Worm Gearbox
Proper maintenance is essential to ensure the longevity and reliable performance of a worm gearbox. Here are some maintenance tips to consider:
- Lubrication: Regularly check and replenish the lubricant in the gearbox. Use the recommended lubricant type and quantity specified by the manufacturer.
- Lubrication Schedule: Follow a lubrication schedule based on the operating conditions and manufacturer recommendations. Regular lubrication prevents friction, reduces wear, and dissipates heat.
- Temperature Monitoring: Keep an eye on the operating temperature of the gearbox. Excessive heat can degrade the lubricant and damage components.
- Cleanliness: Keep the gearbox and surrounding area clean from debris and contaminants. Regularly inspect and clean the gearbox exterior.
- Seal Inspection: Check for any leaks or damage to seals and gaskets. Replace them promptly to prevent lubricant leaks and contamination.
- Alignment: Ensure proper alignment between the worm and worm wheel. Misalignment can lead to increased wear and reduced efficiency.
- Torque Monitoring: Monitor the torque levels during operation. Excessive torque can cause overloading and premature wear.
- Regular Inspections: Periodically inspect all components for signs of wear, damage, or unusual noise. Replace worn or damaged parts promptly.
- Proper Usage: Operate the gearbox within its specified limits, including load, speed, and temperature. Avoid overloading or sudden changes in operating conditions.
- Expert Maintenance: If major maintenance or repairs are needed, consult the manufacturer’s guidelines or seek the assistance of qualified technicians.
By following these maintenance tips and adhering to the manufacturer’s recommendations, you can extend the lifespan of your worm gearbox and ensure its optimal performance over time.
Materials Used for Worm Gears
Worm gears are manufactured using a variety of materials to meet different application requirements. Some commonly used materials for worm gears include:
- Steel: Steel is a popular choice for worm gears due to its strength, durability, and wear resistance. It can handle heavy loads and is often used in industrial applications.
- Bronze: Bronze offers good lubricity and is commonly used for the worm gear (worm) component. It provides effective wear resistance and works well in applications where quiet operation is essential.
- Cast Iron: Cast iron is known for its high strength and durability. It’s often used for worm gears in applications where shock loads or heavy-duty conditions are expected.
- Aluminum: Aluminum worm gears are lightweight and corrosion-resistant, making them suitable for applications where weight reduction is important.
- Plastic: Some worm gears are made from plastic materials such as nylon or acetal. These materials are often chosen for their self-lubricating properties and quiet operation.
- Composite Materials: Composite materials can offer a combination of properties, such as lightweight construction and corrosion resistance. They can be suitable for specific applications.
The choice of material depends on factors such as the application’s load, speed, operating environment, and required performance characteristics. It’s important to consider these factors when selecting the appropriate material for worm gears to ensure optimal performance and longevity.
What is a Worm Gearbox and How Does It Work?
A worm gearbox, also known as a worm gear reducer, is a mechanical device used to transmit rotational motion and torque between non-parallel shafts. It consists of a worm screw and a worm wheel, both of which have helical teeth. The worm screw resembles a threaded cylinder, while the worm wheel is a gear with teeth that mesh with the worm screw.
The working principle of a worm gearbox involves the interaction between the worm screw and the worm wheel. When the worm screw is rotated, its helical teeth engage with the teeth of the worm wheel. As the worm screw rotates, it translates the rotational motion into a perpendicular motion, causing the worm wheel to rotate. This perpendicular motion allows the worm gearbox to achieve a high gear reduction ratio, making it suitable for applications that require significant speed reduction.
One of the key features of a worm gearbox is its ability to provide a high gear reduction ratio in a compact design. However, due to the sliding nature of the meshing teeth, worm gearboxes may exhibit higher friction and lower efficiency compared to other types of gearboxes. Therefore, they are often used in applications where efficiency is not the primary concern but where high torque and speed reduction are essential, such as conveyor systems, elevators, automotive steering systems, and certain industrial machinery.
editor by CX 2023-10-07
China factory Chinese Factory Power Transmission Mechanical Motovario like RV Series Worm and worm gear motor gearboxes supplier
Warranty: 1 calendar year
Applicable Industries: Accommodations, Garment Stores, Equipment Restore Stores, Foods & Beverage Manufacturing unit, House Use, Retail, Design works , Strength & Mining, Advertising and marketing Organization
Fat (KG): 9.4
Tailored support: OEM
Gearing Arrangement: Worm
Output Torque: 2.6-1195N.M
Input Pace: 1400rpm
Output Speed: fourteen-280rpm
Shade: Blue
Certificate: ISO9001
Bearing: CZPT bearing / selfmade bearing
Oil seal: CZPT oil seal
Substance: Aluminiun alloy
IEC motor adapters: 56B14/71B5/80B5/80B14/80B5
Input hole dimension: 9/11/19/14/24/28/38
Quality guarantee: 1 year
Packaging Information: 1 pc / carton,several cartons / wood pallet
Port: ZheJiang ,HangZhou
SMRV Collection WORMEquipment Models Highoutput torque Items Description Technical efficiency and assortment reference
Motor electricity | Design | velocity ratio | output speed | output toruqe |
.25kw 1400rpm | RV075 | 60 | 24rpm | 68.0N.M |
RV075 | 80 | 18rpm | 80.0N.M | |
RV075 | 100 | 14rpm | 94.0N.M | |
.37kw 1400rpm | RV075 | 40 | 35rpm | 74.0N.M |
RV075 | 50 | 28rpm | 88.0N.M | |
RV075 | 60 | 24rpm | 97.0N.M | |
RV075 | 80 | 18rpm | 119.0N.M | |
RV075 | 100 | 14rpm | 139.0N.M | |
.55kw 1400rpm | RV075 | 25 | 56rpm | 76.0N.M |
RV075 | 30 | 47rpm | 87.0N.M | |
RV075 | 40 | 35rpm | 108.0N.M | |
RV075 | 50 | 28rpm | 128.0N.M | |
RV075 | 60 | 24rpm | 144.0N.M | |
RV075 | 80 | 18rpm | 177.0N.M | |
RV075 | 100 | 14rpm | 206.0N.M | |
.75kw 1400rpm | RV075 | 15 | 94rpm | 66.0N.M |
RV075 | 20 | 70rpm | 85.0N.M | |
RV075 | 25 | 56rpm | 101.0N.M | |
RV075 | 30 | 47rpm | 117.0N.M | |
RV075 | 40 | 35rpm | 147.0N.M | |
RV075 | 50 | 28rpm | 174.0N.M | |
RV075 | 60 | 24rpm | 196.0N.M | |
RV075 | 80 | 18rpm | 250.0N.M | |
1.1kw 1400rpm | RV075 | 10 | 140rpm | 66.0N.M |
RV075 | 15 | 94rpm | 95.0N.M | |
RV075 | 20 | 70rpm | 122.0N.M | |
RV075 | 25 | 56rpm | 148.0N.M | |
RV075 | 30 | 47rpm | 171.0N.M | |
RV075 | 40 | 35rpm | 216.0N.M | |
RV075 | 50 | 28rpm | 263.0N.M | |
RV075 | 60 | 24rpm | 297.0N.M | |
one.5kw 1400rpm | RV075 | 7.five | 186rpm | 68.0N.M |
RV075 | 10 | 140rpm | 89.0N.M | |
RV075 | 15 | 94rpm | 129.0N.M | |
RV075 | 20 | 70rpm | 166.0N.M | |
RV075 | 25 | 56rpm | 202.0N.M | |
RV075 | 30 | 47rpm | 233.0N.M | |
RV075 | 40 | 35rpm | 299.0N.M | |
2.2kw 1400rpm | RV075 | 7.5 | 186rpm | 99.0N.M |
RV075 | 10 | 140rpm | 131.0N.M | |
RV075 | 15 | 94rpm | 189.0N.M | |
RV075 | 20 | 70rpm | 249.0N.M | |
RV075 | 25 | 56rpm | 304.0N.M | |
RV075 | 30 | 47rpm | 247.0N.M | |
3.0kw 1400rpm | RV075 | 7.five | 186rpm | 135.0N.M |
RV075 | 10 | 140rpm | 178.0N.M | |
RV075 | 15 | 94rpm | 258.0N.M | |
4.0kw 1400rpm | RV075 | 7.5 | 186rpm | 180.0N.M |
RV075 | 10 | 140rpm | 237.0N.M |
Solution identify | RV075 worm gear speed reducer/worm gearbox |
Ratio | 7.5,10,fifteen,20,twenty five,30,forty,fifty,sixty,eighty,a hundred |
Power | 0.25~4. KW |
Coloration | Blue/Silver/Black or on Request |
Weight | 9 Kg |
Content | Housing : Aluminum alloy |
The gear is produced of carburized 20CrMnTi with great use resistance and no noise | |
The wormwheel is Wheelhub cast iron QT500 and bronze ZQSn10-one | |
The wormshaft:metal 20Cr with a carburized surface area and hardness of HRC60 | |
Solitary device input variations | SMRV : fitted for motor flanged coupling |
SMRV-E : motor flanged coupling with worm extension shaft | |
SRV : with input shaft | |
SRV-E : with double extension worm shaft | |
Suited motor pole | 2pole,4pole,6pole |
Inch dimensions | Available |
Personal customization | Available |
Added service | OEM |
Quality Assurance | 1 calendar year |
Characteristics | High precision, steady transmission and huge output torque.Also meens high good quality, prolonged service daily life. |
There are numerous cooling fins to recognize speedy warmth dissipation | |
Suitable for omni-directional set up | |
Can be easily mounted with a variety of equipment like torque arms, various kinds of flanges, shafts and so on | |
Good rust resistance |
Advantages and disadvantages of worm gear reducer
If you are looking for a worm gear reducer, you have come to the right place. This article will cover the pros and cons of worm gear reducers and discuss the different types available. You will learn about multi-head worm gear reducers, hollow shaft worm gear reducers as well as hypoid gear sets and motors.
Hollow shaft worm gear reducer
Hollow shaft worm gear reducers are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducers depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducers are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducers are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducers, there are also helical gear reducers. These reducers can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer is that it is more efficient than a single-stage gear reducer. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducers are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.
Multi-head worm gear reducer
The multi-head worm gear reducer is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducers have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducers are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
Hypoid Gear Set
Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.
Hypoid gear motor
A hypoid gear motor is a good choice for a worm gear reducer as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer can provide the same output as a 1/2 hp motor driving a worm reducer. A study by Nissei compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducers run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.
R series worm gear reducer
R series worm gear reducers have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.
AGKNX Electric Worm Gear Reducer
AGKNX Electric worm gear reducers are available with NEMA C-face mounting flanges for a variety of motors. These reducers feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducers are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducers are one of the most cost-effective and compact gears. These reducers increase output torque while reducing input speed. AGKNX Electric’s worm gear reducers are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducers have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.
editor by czh